Charging The Vacuum Cleaner; Reset The System; Map Management; Choose The Cleaning Mode - GreenWorks GRV-3011 Manuel D'opérateur

Pause
During the operation of the vacuum cleaner, press any button
to pause the operation.
Sleep
If it is inactive for 10 minutes, the vacuum cleaner will
automatically switch to the sleep mode.
The vacuum cleaner will automatically switch to the sleep
mode 10 minutes after fully charged.
6.2 CHARGING THE VACUUM
CLEANER
• Automatic recharge: After the cleaning task is
completed, it will automatically return for recharge.
• Manual recharge:
a. When paused, press the button
recharge;
b. When the vacuum cleaner is stuck or cannot find the
charging dock, please manually put the vacuum cleaner
back on the dust collection dock for charging.
6.3

RESET THE SYSTEM

In standby mode, press and hold the button
to reset the system.
After resetting the system, the vacuum cleaner will lose the
map and the original settings including the virtual borders.
6.4

MAP MANAGEMENT

A. Real-time drawing of room map
Real-time drawing of a room map can help you easily
understand the cleaning path and environment. After
cleaning, a map of the room will be generated. The map will
be updated in real time during each cleaning to ensure normal
navigation.
Generate a complete room map:
1. Open the door so that the vacuum cleaner generates a
map of each room;
English
2. Remove any objects that may block or jam the vacuum
3. After the map is generated, please do not move the
B. Repositioning and regeneration of a map
When the position of the vacuum cleaner is moved or the
surrounding environment changes significantly, the vacuum
cleaner will try to reposition and may regenerate a map to
match the surrounding environment. The details are as
follows:
1. If the repositioning is successful, the vacuum cleaner will
2. If the repositioning fails, the vacuum cleaner will
•
•
6.5
Suction level selection (It is only supported with the
mobile App)
The cleaning intensity level can be selected according to the
needs in the APP:
•
for automatic
•
•
•
Fixed-point cleaning
Move the vacuum cleaner to the area that needs to be cleaned,
and press the button
vacuum cleaner will clean a rectangular area of 59.1 in. ×
for 15 seconds 59.1 in. (1.5m × 1.5m) centered on itself.
•
13
cleaner;
charging base or disconnect the power supply.
resume cleaning;
regenerate a map to ensure normal navigation for
cleaning.
NOTE
Make sure that the vacuum cleaner starts cleaning every
time from the charging dock.
During cleaning, do not move the vacuum cleaner
frequently. If it is moved, place the vacuum cleaner
back in its original position.

CHOOSE THE CLEANING MODE

Quiet
Standard
Powerful
Super
twice. After the mode is activated, the
The vacuum cleaner cannot start the fixed-point cleaning
mode on the charging dock or the dust collection dock.
59.1 in.
(1.5 m)
59.1 in.
(1.5 m)
EN