Wahl Super Dry Wood Mode D'emploi page 11

Description of parts (Fig. 1)
A TOURMALINE coated front grill
B Filter
C Cold shot button
D Switch for temperature settings
E On/off switch, fan settings
F Hanging loop
G Mains cable
H Narrow attachment nozzle
I Wide attachment nozzle
J Styling diffuser (optional accessory 4360-7000)
K Comb nozzle (optional accessory 4340-7000)
Operation
· Connect to the mains power supply.
· The hairdryer has 3 heat settings and 2 fan set-
tings that, thanks to separate switches, enable
a total of 6 temperature-fan settings. For short
periods, the cold shot button (C) can be used to
fix the hairstyle.
On/off switch, fan setting (E):
· Switch on the appliance at the on/off switch (E)
and select the required fan setting.
I Fan setting 1, for a gentle airflow
II Fan setting 2, for a strong airflow
· Select the required temperature setting.
Switch for temperature settings (D):
O Temperature setting 1, for cold air
I Temperature setting 2, for hot air
II Temperature setting 3, for hotter air
Cold shot (C):
By pressing the button and keeping it depressed,
the hairdryer can be switched to cold air for short
periods. To return to the set temperature, simply
release the cold-shot button.
· Using the on/off switch (E), switch off the appli-
ance after use.
TOURMALINE coating
Negative ions have an antistatic effect and are
gentle to the hair. They close the scale layer, creat-
ing a smooth, silky hair surface and locking in the
natural moisture of the hair, thereby creating the
ultimate shine.
Styling with the nozzle
The nozzle can be used to direct the airflow onto
the styling brush.
· Position the nozzle and press it towards the
housing (Fig. 2ⓐ).
· To remove the nozzle, simply pull it off in the
direction of the arrow (Fig. 2ⓑ).
Cleaning and care
· Disconnect from the mains before cleaning the
appliance.
· Do not immerse the appliance in water!
· Only wipe the appliance with a soft cloth, which
may be dampened slightly.
· Do not use solvents or abrasives!
· To maintain the performance of your hairdryer,
regularly clean the rear filter with a soft brush. To
do so, proceed as follows:
· Twist the filter in an anti-clockwise direc-
tion (Fig. 3ⓐ) and remove.
· Clean the filter and air inlet with a soft
brush (Fig. 4).
· Replace the filter and turn in a clock-
wise direction until it clicks into position
(Fig. 3ⓑ).
Disposal
Adhere to the relevant legal requirements when dis-
posing of the appliance.
Information on the disposal of electrical
and electronic appliances in the European
Community:
Within the European Community, national
regulations are specified for the disposal of
electrical appliances, based on EU Waste
Electrical and Electronic Equipment Direc-
tive 2012/19/EC (WEEE). In accordance
with this, the appliance can no longer be
disposed of with the local or domestic
waste.
The appliance will be accepted free of
charge by local collection points or recycling
centres.
The packaging for this product is made
from recyclable materials. Dispose of this
in an environmentally friendly manner by
recycling it.
ENGLISH
de
en
fr
it
es
pt
nl
da
sv
no
fi
tr
pl
cs
sk
hr
hu
sl
ro
bg
ru
uk
et
lv
lt
el
ar
11