Battery Charging - Topdon Volcano2000PRO+ Mode D'emploi

Connection
State
LED In-
Connect
dicator
Blue
Bluetooth Pairing
Bluetooth Connected
0-14V
V2000
battery
>14V
0-4.2V
Expla-
nation 4.2-11.5V
Vehicle
11.6-12V
Battery
12.1-13V
13V
12
Jump Starter
Battery State
State
Full Middle Low OK Fault
Green Orange Red Green Red
Note: √ means solid, • means flashing
Charging the external electronic devices:
Press the "Power" button;
1.
Use the USB cable to charge mobile devices as cellphones, tablets etc.;
2.
Use the 12V DC output to power appliances as air-compressors, vehicle refrigerators;
Disconnect when the charging is completed.
3.
Use the LED Light as Flashlight or SOS, strobe:
Hold the "Power" button for 3 seconds to turn on LED Light;
1.
2. Press the "Power" button to cycle the LED modes, from Steady Light, to "SOS", and to Strobe.

Battery Charging

Charge this product via the USB type-C input from the wall socket or other 5V-8V
output devices.
When this product is being charged, its LCD will display "Charging" message. When
it's fully charged, the LCD will display a "100%" message.
Please charge this product for at least 8 hours before the first use.
5V USB Charger Rating
1A
Time 12hr
2A 3A
6hr
4hr
13