Topdon Volcano2000PRO+ Mode D'emploi page 5

NO. Function
Press to charge the external electronic devices as
cellphones etc.;
1 Power Button
Press to check its remaining battery capacity;
Hold to turn on/off the flashlight.
2 LCD Display
Display the remaining power and output status.
3 Auto Jump Starting Port 12V, 2000A.
Charge mobile devices and cameras etc, 50% faster
4 Output 5V/2.1A
than a standard charger.
Charge mobile devices and cameras etc, 75% faster
5 Output QC3.0
than a standard charger.
6 Flashlight
Serve as Steady Light, or SOS, or Strobe.
Output port to charge mobile devices, tablet and cameras.
Type-C Input & Output
7
Input port to charge this product.
Power DC-powered devices as air-compressor, GPS, Vehicle
DC Output
8
Fridge, Vehicle Vacuum Cleaner, and Vehicle Air Purifier, etc.
Charge the Qi-certified cellphones.
9 Wireless Charging
6
Operation NO. Function
10 Smart Clamp Plug Insert the plug fully into the jump starter.
Display jump starter battery voltage/abnormal condition,
vehicle battery data, and alternator output voltage after
11 Digital Display
jump start.
Press once to switch between jump start mode and
Switch Mode Button
12
battery test mode.
6 LED indicators showing jump starter , vehicle
13 LED Indicator
battery and bluetooth connection status
14
Red Smart Clamp Connect to the positive terminal of the car battery.
15 Black Smart Clamp Connect to the negative terminal of the car battery.
Operation
7