Preventive Maintenance; Technical Specifications; Technical Support/Service; Warranty Registration - CORNING Scholar 170 Notice D'utilisation

8.0 Preventive Maintenance

Disconnect power by unplugging unit before performing any maintenance
◗ ◗
or service .
Always use a grounded power outlet.
◗ ◗
Keep top surface clean and dry. Unplug unit and use non-abrasive
◗ ◗
cleaner . Contact Corning if there is any doubt about the compatibility of
decontamination or cleaning agents .
Clean spills promptly. If liquid or solid material gets inside the product,
◗ ◗
immediately disconnect power to the product, use non-abrasive cleaner,
and discontinue use . Contact Corning for additional instructions regarding
interior spills .

9.0 Technical Specifications

Corning
Cat. No. Model
6795-170 PC-170 Hot Plate
6796-170 PC-170 Hot Plate
6797-170 PC-170 Hot Plate
6795-171 PC-171 Stirrer

10.0 Technical Support/Service

If you have a question or a service inquiry about the Corning® Scholar™ 170
Hot Plate or Scholar 171 Stirrer, contact Corning Customer Service immediately
at 1.800.492.1110 (United States and Canada), 1.978.442.2200 (outside the
United States), or Contact your local Corning sales office.
Before returning any unit for service, a Return Authorization (RA) number
must first be obtained . Equipment sent in without our prior authorization
will be returned at the customer's expense . When returning a unit to
Corning for service, it should be sent in the original packaging. If this is not
possible, be sure that the unit is sufficiently packed. Any damage resulting
from improper packaging is the responsibility of the customer . A written
explanation should accompany the unit along with the RA number .

11.0 Warranty Registration

Your purchase of this product must be registered with Corning in order
for your warranty to be in effect . Please register your warranty online at
www.corning.com/lifesciences/warranty .
4
All manuals and user guides at all-guides.com
Temp. Stir Range
Power Range (rpm)
120V/50-60Hz/ 60°C - 360°C N/A
250W/2.1A
230V/50-60Hz/ 60°C - 360°C N/A
250W/1.1A
100V/50-60Hz/ 60°C - 360°C N/A
250W/2.5A
120V/50-60Hz/ N/A 100 - 1,600
30W/0.25A

12.0 Warranty

Corning Incorporated (Corning) warrants that this product will be free
from defects in material and workmanship for a period of (1) year from
date of purchase. CORNING DISCLAIMS ALL OTHER WARRANTIES WHETHER
EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE. Corning's
sole obligation shall be to repair or replace, at its option, any product or
part thereof that proves defective in material or workmanship within the
warranty period, provided the purchaser notifies Corning of any such defect.
Corning is not liable for any incidental or consequential damages, commer-
cial loss or any other damages from the use of this product .
This warranty is valid only if the product is used for its intended purpose
and within the guidelines specified in the supplied instruction manual .
This warranty does not cover damage caused by accident, neglect, misuse,
improper service, natural forces, or other causes not arising from defects
in original material or workmanship . This warranty does not cover motor
brushes, fuses, light bulbs, batteries, or damage to paint or finish. Claims for
transit damage should be filed with the transportation carrier .
In the event this product fails within the specified period of time because of
a defect in material or workmanship, contact Corning Customer Service at
the following numbers: USA: 1.800.492.1110; Canada: 1.978.442.2200. For
other regions of the world, visit www.corning.com/lifesciences or see the
included instruction manual for a list of worldwide support offices .
Corning's Customer Service team will help arrange local service where avail-
able, coordinate a return authorization number, or provide a return authori-
zation number and shipping instructions . Products received without proper
authorization will be returned . All items returned for service should be sent
postage prepaid in the original packaging or other suitable carton, padded
to avoid damage . Corning will not be responsible for damage incurred by
improper packaging . Corning may elect for onsite service for larger equipment .
Some states do not allow limitation on the length of implied warranties
or the exclusion or limitation of incidental or consequential damages . This
warranty gives you specific legal rights. You may have other rights which
vary from state to state .
No individual may accept for, or on behalf of Corning, any other obligation
of liability, or extend the period of this warranty.
For your reference, make a note of the model and serial number, date of
purchase, and supplier here.
Model No. ____________________ Serial No. _______________________________
Date Purchased ___________________________________________________________
Supplier _________________________________________________________________
5