Pioneer F-F3-J Mode D'emploi page 8

02 Connections
1
2
ANTENNA
FM
UNBAL 75Ω
1 Pull off the protective shields of both AM
antenna wires.
2 Push open the tabs, then insert one wire
fully into each terminal, then release the tabs
to secure the AM antenna wires.
3 Fix the AM loop antenna to the attached
stand.
To fix the stand to the antenna, bend in the
direction indicated by the arrow (fig. A) then
clip the loop onto the stand (fig. B).
• If you plan to mount the AM antenna to a
wall or other surface, secure the stand with
screws (fig. C) before clipping the loop to
the stand. Make sure the reception is clear.
Note
1 Do not connect two FM antennas simultaneously.
8
En
All manuals and user guides at all-guides.com
fig. A
3
5
FM antenna
LINEOUT
L
AM
LOOP
R
fig. C
fig. B
4
AM loop antenna
CONTROL
IN OUT
4 Place the AM loop antenna on a flat
surface, pointing in the direction that
produces best reception.
Don't let it come into contact with metal
objects and avoid placing near computers,
television sets or other electrical appliances.
5 Connect the FM antenna
as the AM loop antenna.
For best results, extend the FM antenna fully
and fix to a wall or door frame. Don't drape
loosely or leave coiled up.
AC IN
1
in the same way