Other Connections; Connecting External Antennas - Pioneer F-F3-J Mode D'emploi

05

Other connections

Chapter 5:
Other connections
Caution
• Make sure the power is switched off before making or changing the connections.

Connecting external antennas

external FM antenna external AM antenna
Indoor antenna
(vinyl-coated Wire)
(5 m to 6 m)
ANTENNA
FM
UNBAL 75Ω
PAL connector
• For an external AM antenna, use 5 m to 6 m
of vinyl-insulated wire and set up either
indoors or outdoors. Leave the loop
antenna connected. Only use the included
AM loop antenna.
• For an external FM antenna, use a PAL
connector to hook up an external FM
antenna.
20
En
All manuals and user guides at all-guides.com
Outdoor antenna
Loop antenna
ANTENNA
AM
FM AM
LOOP
UNBAL 75Ω LOOP
Operating this tuner with the
remote sensor of your Pioneer
amplifier
Many Pioneer components have SR CONTROL
jacks which can be used to link components
together so that you can use just the remote
sensor of one component. When you use a
remote control, the control signal is passed
along the chain to the appropriate component.
Note that if you use this feature, make sure that
you also have at least one set of analog audio
jacks connected to another component for
grounding purposes.
1 Connect the CONTROL IN jack of this tuner
to the CONTROL OUT jack of your Pioneer
amplifier.
Use a cable with a mono mini-plug on each
end for the connection.
Amplifier This tuner
Pioneer
component
To control
remote
output
control
2 This process can be used to form a daisy-
chain linkage with other Pioneer components
as well.
CD player, etc.
To control
CONTROL
input
IN OUT