Table des Matières
Publicité
All manuals and user guides at all-guides.com
How to Clean the Inner Container with Citric Acid
V E L
R L E
A T E
X . W
水 位
M A
最 高
V E L
R L E
A T E
X . W
水 位
M A
最 高
1. Make sure that the mesh filter is attached to the
container.
2. Put citric acid in the inner container.
Amount of citric acid to be used at one time
●
NC-ER30N: 80N (two packages)
or seven level tablespoons
NC-ER22N: 40N (one package)
or three to four level tablespoons
3. Add water to the maximum water level mark, and mix
the citric acid and water well. Close the lid.
4. Connect the plug immediately after stirring and
press the 'Select' key until the indicator light next to
'Cleaning' lights up.
Cleaning start
10hrs
208
Economy
Timer
6 hrs
140
Cleaning time
Cleaning
NC-ER30N: approx. 41 min.
NC-ER22N: approx. 35 min.
Lights
5. Unplug, remove the lid and throw away the hot water
following guideline for throwing away hot water.
6. Refill with water and boil it to remove the smell of
the citric acid. Then throw away the hot water
following the guideline.
The citric acid is available at an authorized dealer.
（Model No:SAN-80N）
* Follow the directions for cleaning printed on the citric acid
package.
* Since the citric acid used for cleaning is a food additive, it is
harmless to humans.
Notice
To remove any discoloration from the area above the
●
maximum water level, rub the inside lightly with a wet sponge.
If the discoloration cannot be removed by rubbing, clean the
●
inner container several times using citric acid.
End of cleaning
10hrs
208
Economy
Timer
6 hrs
140
Cleaning
Flashes
28
Publicité
Table des Matières
