Dentsply Sirona Prime&Bond XP Mode D'emploi page 13

3.8.6 Completion
1. Immediately begin placing and condensing amalgam (e.g. Dispersalloy
loy) as per manufacturer's directions.
4 Hygiene
Cross-contamination.
Infection.
1. Do not reuse single use products. Dispose in accordance with local regulations.
2. Reprocess reusable products as described below.
4.1 Prime&Bond XP bottle
®
Cross-contamination.
Infection.
1. The bottle cannot be reprocessed.
2. To prevent bottles from exposure to spatter or spray of body fluids or contami-
nated hands it is mandatory that the bottle is handled offside the dental unit with
clean/disinfected gloves.
3. During treatment clinicians with patient contact should not handle bottle.
4.2 CliXdish™ mixing well
For reprocessing instructions please refer to the Instructions for Use of the CliXdish™, which is
available on our webpage at www.dentsply.eu/IFU. If requested, we will send you a free printed
copy of the Instructions for Use in the language you require within 7 days. You can use the order
form provided on our webpage for this purpose.
4.3 Unit Dose Holder
For reprocessing instructions please refer to the Instructions for Use of the Unit Dose Holder, which
is available on our webpage at www.dentsply.eu/IFU. If requested, we will send you a free printed
copy of the Instructions for Use in the language you require within 7 days. You can use the order
form provided on our webpage for this purpose.
Dispersed Phase Al-
®
12