Publicité
Liens rapides
Dual purpose oil-filled pump that may be used totally submersed or in-line (fed with pipe or hose). For commercial,
industrial and home applications including statuary fountains, water displays, air conditioners, machine tool coolants,
and many other applications where liquid must be transferred or recirculated. This compact 205 GPH pump features a
1/4" MNPT discharge and 7.4' shut-off head capability.
1-42 Series
Features
For submersed or in-line use
n
Epoxy coated die-cast aluminum housing
n
Oil-filled motor
n
7.4' maximum lift
n
70 watts
n
1/4" MNPT discharge
n
Thermal overload protection
n
Construction
Motor — 1/150 HP oil-filled
n
Maximum Flow Rate — 205 GPH @ 1'
n
Maximum Head — 7.4'
n
Intermittent Liquid Temp. up to — 120°F
n
Intake — 1/2" MNPT & 1/4" FNPT
n
Discharge — 1/4" MNPT
n
Housing — Epoxy coated cast aluminum
n
Cover — Epoxy coated cast aluminum
n
Volute — Nylon
n
Impeller — Nylon
n
Shaft Seal — Nitrile
n
Dual Purpose Pumps
Publicité
Manuels Connexes pour Franklin Electric Little Giant #1 Serie
Sommaire des Matières pour Franklin Electric Little Giant #1 Serie
- Page 1 Dual Purpose Pumps 1-42 Series Features For submersed or in-line use Epoxy coated die-cast aluminum housing Oil-filled motor 7.4' maximum lift 70 watts 1/4" MNPT discharge Thermal overload protection Construction Motor — 1/150 HP oil-filled Maximum Flow Rate — 205 GPH @ 1' Maximum Head — 7.4' Intermittent Liquid Temp. up to — 120°F Intake — 1/2" MNPT & 1/4" FNPT Discharge — 1/4" MNPT Housing — Epoxy coated cast aluminum Cover — Epoxy coated cast aluminum Volute — Nylon Impeller — Nylon Shaft Seal — Nitrile Dual purpose oil-filled pump that may be used totally submersed or in-line (fed with pipe or hose). For commercial, industrial and home applications including statuary fountains, water displays, air conditioners, machine tool coolants, and many other applications where liquid must be transferred or recirculated. This compact 205 GPH pump features a 1/4" MNPT discharge and 7.4' shut-off head capability.
-
Page 2: Replacement Parts
1-42 Series Specifications Performance (GPH@Head) Shutoff Model Item Discharge Intake Cord Weight Size Size Listing(s) Volts Hertz Amps Watts P.S.I. Length (ft.) (lbs.) 1/2" FNPT & 1-42 501203 1/4" MNPT 1/150 3.50 1/4" FNPT FLOW - LITERS/HOUR Replacement Parts Volute 101330 Impeller 101442... - Page 3 SÉRIE #1 5. Do not let the unit operate dry (without liquid). It is designed to be cooled by Franklin Electric Co., Inc. pumping fluid. You may damage the seal and the motor may fail if the pump is P. O. Box 12010 MODELOS DE LA allowed to run dry.
- Page 4 s’assurer qu’elle est bien raccordée à une prise de courant appropriée ebjet. Pendant 10 secondes, brancher l’appareil dans un circuit muni d’un comportant une borne de mise à la terre. disjoncteur de fuite à la terre pour déterminer si la roue à aubes toune librement;...
-
Page 5: Conexiones Electricas
CONEXIONES ELECTRICAS 2. Una limpieza periódica de las piezas de la bomba prolongará la vida y eficiencia de la bomba. Vea la Figura 2 para montar y desmontar la cabeza de bombeo. 3. En primer lugar, quite la rejilla de la toma de la bomba. Después quite los 1. - Page 6 Franklin Electric Co., Inc., soit avisera l’usine du El Código Eléctrico Nacional (en los Estados Unidos) y códigos similares en otros países problème afin de connaître la décision de celle-ci et le règlement de la réclamation.