Publicité
Les langues disponibles
Les langues disponibles
INSERTING THE DELTA CLIPS:
• Layout your NINJALINE™ line, note the sewn in DELTA CLIP 1 ½ inch (38 mm) SLEEVES, these are where you
can insert and attach your obstacles.
• DO NOT ATTACH YOUR OBSTACLES ANYWHERE OUTSIDE THE SEWN IN SLEEVES.
• DO NOT MODIFY YOUR NINJALINE OR OBSTACLES, USE ONLY b4Adventure NINJALINE™ Parts.
• Attach your obstacles keeping in mind the reach length your users will have. You may have to do several different
"layouts" to have a workable course. Note: Do not remove Delta Clips when the line is under tension as you may
damage your line.
• To open the Delta clip simply twist open the locking portion of the clip. (Figure 1) Insert the clip into the desired
NINJALINE™, sewn line sleeve. Twist to close clip.
Figure 1
Correct
Incorrect
Incorrect
NINJA GRIP CLIPS: Your set may include additional clips that can be used to extend the play area on the
NINJALINE™ by adding more obstacles on the ends of the line, outside of where pockets are sewn. See below for
instructions on how to attach your obstacles using the Ninja Grip Clips.
STEP 1
STEP 2
STEP 3
STEP 4
Start by feeding the
Pull the line through the
Make sure the line is flat
Insert the Delta carabiner
line through the top
bottom of the clip to create
inside the clip, with the open-
into the U shape and pull
opening of the clip
ing facing upward
a U shape
the line outside the clip taut.
*Note: The Delta carabiner should be centered between the 2 divits on the inside of the clip
NINJALINE™ SET UP
• Make sure the SLACKERS logo is FACE UP.
• Take Ratchet Line: wrap around tree and tighten (Figure 2). TIP: to keep you line flat, pinch the line to form a
U-shape section where it feeds through the looped end (Figure 3).
• Take Slackline walking line and wrap around the opposite tree and tighten keeping line flat and not twisted
(Figure 4).
Figure 2
Figure 3
Figure 4
b4Adventure • Denver Colorado 80216 • 1-844-834-4334 • info@b4adventure.com
www.b4adventure.com - DC:082919
3
Publicité
