Klarstein PARTYTIME Manuel page 25

Problem Possible Cause
The ice cubes Making ice takes too
clump together. much time.
The water in the water
reservoir has a too low
temperature.
The ice-making The ambient temperature
cycle seems or water temperature is
normal but no ice is too high.
produced.
The refrigerating system
leaks.
The refrigerant system is
blocked.
Poor ice-making Poor heat dissipation.
result.
The water temperature is
too high.
The ambient temperature is
too high.
Solution
Stop making ice and restart the
ice-making cycle after the ice has
melted.
Fill the water reservoir with
water ranges between 8 °C and
25 °C.
Start the ice-making cycle at an
environment with an ambient
temperature less than 32°C and
fill the water reservoir with some
cold water.
Contact customer service.
Contact customer service.
Keep a minimum distance
of 20 cm to all sides of the
appliance to ensure proper
ventilation.
Fill the water reservoir with
water ranges between 8 °C and
28 °C.
Operate the ice cube maker at
an environment with an ambient
temperature between 10 °C and
32 °C.
EN
25