Keekaroo HEIGHT RIGHT Notice D'utilisation page 3

* Seat Plate must be
placed in top slots of the
chair legs when Tray &
Plastic Crotch Bar are used.
Back Leg
Supports
2
TIGHTEN ALL SCREWS (BOTH SIDES) IN
5
ORDER 1-6 _DO NOT OVER TIGHTEN!
Plastic Tray Cover
Plastic Tray Cover is dishwasher safe.
Be sure to wipe dry & NOT trap water
between wood & plastic when reinstalling.
5 Year Limited Warranty
Bergeron by Design warrants to the original retail purchaser of the Height Right Chair product, that if any part or component
proves defective in material or workmanship within five years of the purchase date, the defective part will be repaired or
replaced (at Bergeron by Design's discretion) free of charge. Warranty service may be performed by an authorized service
center or at Bergeron by Design's discretion.
This warranty does not cover normal wear and tear, or damage caused by accident or misuse.
To exercise this limited warranty, the user should first obtain a Return Authorization Number from Bergeron By Design.
The product must be delivered charges pre-paid (UPS recommended) to the factory
or to an authorized service center, together with a copy of the original invoice, the Return Authorization Number and a
written description of the problem.
Customer Service
Toll Free: 1.866.529.8407
International: 1.315.429.8407
Fax: 1.315.429.8862
Product Care
Clean chair with damp cloth; then wipe dry. With normal use, over time screws may loosen. Please maintain tight screws. Use chair on level surface.
Notice
When restraint system is used properly this high chair meets U.S. ASTM F-404 safety standard. Use only Height Right Chair accessories and parts. Height
Right Chair parts are not interchangable with other manufacturers' products. Replace any worn parts immediately for safety. © 2009 Bergeron By Design.
Bergeron By Design • 15 South Second St. Dolgeville, NY 13329
All manuals and user guides at all-guides.com
Tray Caps
Back Rest
3
Plastic
Crotch Bar
6
Top Metal
Cross Bar
5
4
Bottom
Metal
Cross Bar
Front
Support
1
HARDWARE_
If the Tray or Grab accessories ARE used;
Attach the Right Clip as shown in upper picture
with 2 Small Screws (b). Repeat for Left. If Tray
or Grab accessories ARE not used; Attach
6
Black Caps with 2 small Screws (b). as shown in
lower picture. Repeat for Left.
• 1.866.529.8407
Tray Clips
Tray Installation with Clips
7b
Second
Safety Latch
b (4pcs.)
Engaged.
7a
7b
Seat and Footrest Adjustment
Height
• The seat is placed at optimal height when
the child's elbows are level with the top
of the table.
• The foot plate is placed at optimal height
when the child's foot can rest flat
on it's surface.
Depth
• For optimal depth of the seat, position
child's back against backrest with seat
supporting 3/4 of thigh.
• For safety, the footrest should not exceed
the front legs of the chair.
Teen / Adult Use
• Remove Seat Plate & Top metal cross bar.
• Use the Foot Rest as the Seat Plate for a
larger seating surface.
• Tighten all screws.
Primary
7a
Spring Lock
When Tray is properly installed an
audible "click" will be heard from primary lock.
Engage the second safety Latch Lever by
pushing it forward into the primary spring lock.
3 Point Belt Operation
Lap Strap
"CLICK"
Crotch
Strap
Height Right High Chair - Natural
Model # 0050032KR-0001
Height Right High Chair - Mahogany
Model # 0050033KR-0001
3 US