Publicité
Les langues disponibles
Les langues disponibles
Height Right High Chair
WARNING
!
:
Seat Plate must be installed in the top
slot while using Plastic Crotch Bar, with Tray, or grabrail.
WARNING
!
:
Prevent serious injury or
death from falls or sliding out.
WARNING
!
:
system. The tray is not designed to hold the child in the chair. It is recommended that the chair be
used only by children capable of sitting upright unassisted.
Parts
Back
Right Side
Left Side
1
e
a
a (3pcs.)
HARDWARE
d (3pcs.)
e (3pcs.)
Insert a Wooden Dowel (e) into the larger hole in each of the Back Supports
and Front Support. Insert a Wood Nut (a), as shown into the inner holes of
the 3 Supports. Attach the 3 Wooden Supports as shown and insert Long
Screws (d). Loosely tighten the Long Screws into Wood Nuts through the Left
Side with the Allen Key. Labeling on the Rear Supports should be visible.
3
c
c
All manuals and user guides at all-guides.com
The child should be secured in the high chair at all times by the restraining
• SHORTER THAN
BACK SUPPORTS
2 Back Supports
Front Support
Seat Plate
Foot Rest
d
SUPPORT IS
SHORTER
Logos this side
a.
HARDWARE
d
Insert the rest of the Dowels, Wood Nuts, and
Screws as needed to attach the Right Side of
the chair. Do Not fully tighten screws.
c
c
b.
HARDWARE
d
Attach the 2 Metal Cross Bars as shown and
d
insert Screws (c) . Loosely tighten the
Screws (c) into the Metal Cross Bars through
Both sides with the Allen Key.
d
WARNING
!
• Always secure child in the restraint
• Never leave child unattended
• Always keep child in view
• Secure straps tightly
• Never use as a stepping stool
• The front edge of the footrest should never
extend beyond the bottom edge of the front
supports at floor level
2 Metal Cross Bars
c
b
a
(8 pcs.) (4 pcs.)(6 pcs.)(8 pcs.)
2
FRONT
a
HARDWARE
Insert a Wood Nut (a), as shown into the inner holes of the Back. Attach the
Back as shown and insert a Long Screw (d). Loosely tighten the Long Screw
into Wood Nut through the Left Side with the Allen Key.
a (4pcs.)
d (4pcs.)
e (3pcs.)
c (4pcs.)
:
Allen Key
Plastic Crotch Bar
d
e
(6 pcs.)
Right + Left Cap Right + Left Clip
d
a (1pcs.)
d (1pcs.)
4
* 3 Point Crotch Belt
attachment buckle will
nest between seat plate
& Plastic Crotch Bar.
HARDWARE
c (2pcs.)
Align the Plastic Crotch Bar as shown to bottom
of Seat Plate and insert Screws (c) . Tighten the
Screws (c) into the Seat Plate bottom with the
Allen Key.
2
US
Tray & Plastic Cover
Seat Pad
c c
Publicité
