Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
TROUBLESHOOTING AND MAINTENANCE
2.1
TROUBLESHOOTING
If problems occur, verify the installation of the camera with the
instructions in this manual and with other operating equipment. Isolate
the problem to the specific piece of equipment in the system and refer
to the equipment manual for further information.
Problem
No Video
Video, but no control
2.2
PREVENTIVE MAINTENANCE
Preventive maintenance allows detection and correction of minor faults
before they become serious and cause equipment failure.
Every three months, perform the following maintenance:
a)
Inspect all connecting cables for deterioration or other damage.
b)
Clean components with a clean damp cloth.
c)
Verify that all the mounting hardware is secure.
All manuals and user guides at all-guides.com
SECTION 2
Possible Solution
1.
Verify power to all pieces of equipment
in the system.
2.
Verify that the power switches are in
the ON position.
3.
Verify that the lens cap has been
removed from the lens or that the iris
of the lens is open.
1.
Power down the system for one
minute, then turn power back ON.
English
11
Publicité
Table des Matières
