Honeywell Home HM750A1000 Instructions D'installation page 17

Component
Cylinder plugs Power connectors to electrodes in cylinder.
Drain outlet Connection to drain hose, used to remove water from the humidifier.
Drain valve Drains water from humidifier.
Fill cup Provides an air gap for backflow prevention.
Fill valve Controls flow of water into humidifier.
High water sensor Used to detect maximum water level in cylinder.
Power/Drain button Used to turn the humidifier on or off. Note that before the humidifier turns off, the water in the
cylinder is drained.
Steam cylinder Steam generating vessel that holds electrodes in water. Current between electrodes generates
heat used to generate steam.
Steam outlet Connects to steam guide with short piece of steam hose.
Supply water Connection for supply water.
connection
User interface Used to indicate the status of the humidifier to the user.
STEAM
OUTLET
HIGH
WATER
SENSOR
HM750
Status
USER
Idle
Filling
INTERFACE
Humidifying
Draining
Service
Cylinder
POWER/DRAIN
Fault
BUTTON
Power
Drain
Fault Codes In Front Cover
FILL
VALVE
QUICK
CONNECTOR
Fig. 26. Humidifier components.
CAUTION
The unit will still be powered internally even after being shut down.
FILL
CUP
CYLINDER
PLUGS
STEAM
CYLINDER
DRAIN
VALVE
DRAIN
OUTLET
M37211
Function
17
HM750A1000
33-00289EF—05