Uline KIHLBERG JK35T-590 Manuel page 3

• Never point the stapler at yourself or at anyone else,
whether it contains staples or not. Always remove
your finger from the trigger when not driving staples.
• Connect the stapler to the compressed air line
before loading staples. Maximum air pressure is
7 bar.
• Ensure that the air hose has the right dimension
to avoid pressure drops which might cause
malfunctioning. Minimum ¼".
• The stapler and the hose must have a coupling
which automatically bleeds all air pressure from the
stapler when it is disconnected.
• Always disconnect the stapler from the air supply,
empty the magazine and read the safety warnings
before starting maintenance.
• Check daily that all safety devices function properly,
especially that the trigger moves freely and that all
screws and nuts are securely tightened.
MFG. PART NO.
JK35T590
• Air pressure:
– Approx. 5-6 bar working pressure.
– 7 bar maximum air pressure.
• The stapler is designed for use with original Josef
Kihlberg staples only.
PAGE 3 OF 9
SAFETY WARNINGS CONTINUED
MAINTENANCE
SPECIFICATIONS
HEIGHT LENGTH
220mm 335mm
• Avoid personal injury. Never hold your hand or
another part of your body under the stapler.
• Do not load the stapler with the trigger depressed.
• Use only Josef Kihlberg JK590 staples: Item # S-18712,
S-18713 and S-18714.
• Always place yourself in a firmly balanced position
when using or handling the stapler.
• This stapler does not require any special servicing.
It only needs regular cleaning with a non-corrosive
cleaning agent. Do not remove any parts for
cleaning purposes!
• Check that the stapler is properly lubricated.
The stapler must be lubricated by an oil mist.
A silicon-based grease is recommended.
WIDTH WEIGHT
65mm 2,65kg
• Magazine loading: Loaded from above.
• Firing of the stapler: Single shot firing.
• Air consumption per shot:0,85 1 at 6 bar operating
pressure.
1-800-295-5510
uline.com
STAPLES LENGTH
590 19-32mm
MAGAZINE
CAPACITY
100
0421 IH-3533