Maintenance Manual Leia (Eng); Maintenance, Inspection And Test - human care Leia Manuel De Maintenance

Maintenance Manual Leia (ENG)

Maintenance, inspection and test

To ensure that your walking aid is functioning
properly and safely, an annual inspection
should be done only by an authorized agent.
The following maintenance should be done
regularly:
Cleaning
When cleaning the walker it is
recommended machine washing, 60
degrees for 10 minutes. When using a
pressure washer, do not wash directly
to the bearings. In addition to machine
washing, regular cleaning with a mild
cleanser is recommended.
Note! Do NOT use thinner, petrol or other
solvents.
Post treatment
After washing, all connections, tight
spaces and drainage holes should be
blown dry and sprayed with thin oil.
If degreaser is used, the moving parts
should be lubricated.
The Paint
Control damages to the paint.
Pipe frame
Control weldings and screw attaches. If
the corrosion is extensive the rollator
should be replaced.
Handle
Must be fixed. Make sure the handle
profiles can be pushed down to the
chassis. Change the grip if needed.
www.humancaregroup.com
All manuals and user guides at all-guides.com
Brakes
Control that both brakes and parking
brakes are working. Wires should be
intact.
Height adjustment
Control function.
CE-marking
Make sure that the CE-marking is still
there and readable.
Reflectors
Make sure the reflectors are still there
and visible.
Wheels
Make sure the wheels are not worn-
out and are spinning easily without any
noise.
Front forks
Make sure that the ball bearing is firmly
attached and that the forks swings easily.
The front fork inertia can be adjusted by
tightening or untightening the locking
nut.
Folding mechanism
Control function
Seat
Make sure the seat remains in place and
the screws secure and that the seat pad
is properly mounted.
ENG
3