Troubleshooting; Waste Disposal; Bartscher Gmbh; Franz-Kleine-Str. 28 - Bartscher SNACK Mode D'emploi

7. Troubleshooting

PROBLEM
Plug the machine and get
through power supply, power
indicator is not on and heat.
Heating indicator is not on and
temperature is not raised.
Power indicator is on but the
setting temperature is not
raised.
Temperature controller is
normal but indicator is not on.
After circuit heating electric
heating tube is not heated.
Temperature control can not
be controlled.

8. Waste disposal

Discarding old devices
At the end of its service life the discarded device has to be disposed in accordance to the national
regulations. It is advisable to contact a company which is specialized in waste disposal, or just
contact the local disposal service in your community.
WARNING!
To exclude any abuse and the dangers involved make the waste device unfit for use before
disposal. For that purpose disconnect device from mains supply and remove mains
connection cable from the device.
NOTE!

Bartscher GmbH

Franz-Kleine-Str. 28

D-33154 Salzkotten
Germany
- 22 -
All manuals and user guides at all-guides.com
CAUSE
•
Plug is not inserted well.
•
Micro-switch contacts not
well.
•
Connection of electric heating
tube is loosened.
•
Temperature controller is
burned.
•
Indicator is burned.
•
The „over heating protecting
button"is available.
•
Temperature limiter is out of
order.
For the disposal of the device please consider and act according
to the national and local rules and regulations.
SOLUTION
•
Remove the plug.
•
Contact retailer
•
Contact retailer
•
Contact retailer
•
Contact retailer
•
RESET-switch
•
Contact retailer
phone: +49 (0) 5258 971-0
fax: +49 (0) 5258 971-120
.