Real Flame 2610B Manuel D'instruction page 4

Figure 2
5
1
Figure 4
All manuals and user guides at all-guides.com
8
4
Figure 3
Insert the end of the Lift Assembly (7) into the hole
at the top of Lift Assembly Leg (8).
Using two bolts attach Lift Assembly to the left side
of the grate through two hole in the leg on left side.
7
Raise the handle on the lift assembly to the open
position.
Place the Front Log (4) and the Rear Log (5) as
shown in figure 3.
Attach the Left Log (1) to the metal finger stamped
"1" with two bolts as shown in figure 4.
NOTE: use caution not to over tighten bolts.
Step Two
Figure 2
Step Three
Figure 3
Step Four
Figure 4