Lid Removal - Idylis IF50CM23NW Mode D'emploi

CARE AND MAINTENANCE

LID REMOVAL

CAUTION
CAUTION
If it is necessary to remove the lid, follow these steps:
1. Remove the lower part of the hinge cover and then remove the upper part.
2. Open the lid to the maximum position. (The hinges are loosest at this position.)
3. Remove the 4 screws from the upper part of the hinge and the lid. Do this for
each of the 2 hinges.
4. To reinstall lid follow steps in reverse. Tighten all hinge screws but avoid over-
tightening to prevent stripping. Reinstall hinge covers.
49-60783
LIFTING HAZARD
The lid is heavy. Use both hands to secure the lid before lifting.
HINGE SPRING UNDER TENSION
Hinge screws to
be removed
13
Upper Hinge
Cover
Lower Hinge
Cover