Evolution 063-0001 Manuel D'instructions page 12

3. The Dust Collection Bag
A dust collection bag is provided with the machine and must
always be fitted to the dust extraction port found at the rear
of the machine. (Fig. 5)
The dust bag pushes onto the dust extraction port.
Note: To maintain efficient dust collection we recommend that
the dust collection bag be emptied when approximately 60% full.
To empty the dust bag:
• Remove the bag from the machine by pulling it away from
the dust extraction port.
• Empty the bag by opening the zip on the dust bag.
Note: When emptying the dust collection bag the operator
should always wear a suitable dust mask. Also the contents
of the dust collection bag should be disposed of in an
environmentally responsible way.
4. ON/OFF switch (Fig. 6)
The 'ON/OFF' rocker switch is located at the top front of the machine.
• Press 'I' to start.
• Press '0' to stop.
WARNING: Always ensure that the machine is switched 'off' and
the belt is stationary before putting the machine down onto a
workbench or similar.
5. Hand Grip Area
The top surface of the machine is coated with a soft grip area
for enhanced operator control and comfort. This machine can
be used one handedly.
www.evolutionpowertools.com
Fig. 5
Fig. 6
12