Samsung WF210 Serie Manuel D'utilisation page 33

For any codes not listed above, call 1–800–726–7864 (1–800–SAMSUNG)
WF210AN-02832B-07_EN_20120813.indd Sec6:33 WF210AN-02832B-07_EN_20120813.indd Sec6:33
Water detected over the safe
water level.
Jammed Key.
Motor speed sensor problem.
Temperature sensor problem.
High current detected.
High/Low voltage detected.
Too many suds are detected
during the washing session.
The unit is put on hold until the
suds are reduced. Then, the unit
will go back to the operation.
When it finishes washing, End and
Sd codes will blink in turn.
Call for service
Call for service
Restart the cycle.
If the code reappears, call for service.
Restart the cycle.
If the code reappears, call for service.
Restart the cycle.
If the code reappears, call for service.
Restart the cycle.
If the code reappears, call for service.
To prevent, reduce the amount of detergent.
troubleshooting and information codes _33
2012-08-14 2012-08-14 1:27:03 1:27:03