Care And Cleaning; Technical Data - Novis ProBlender Mode D'emploi

Care and Cleaning

Normal cleaning of the container
Fill the container half full with warm water.
1.
Add 2-3 drops conventional washing-up liquid to the container.
2.
Place the container fitted with the lid (with inserted measuring cup) correctly on the
3.
drive unit.
Start the cleaning program by selecting it with the program controller «
4.
pressing the start / stop button. For For NOVIS ProBlenders without program functions,
allow the appliance to run at level 2 for about 2 minutes.
Rinse the container thoroughly with warm water and dry.
5.
Intensive cleaning of the container
Fill the container about half full with undiluted vinegar.
1.
Place the container fitted with the lid (with inserted measuring cup) correctly on the
2.
drive unit.
Start the NOVIS ProBlender on speed level 1 and increase to level 4. Allow the unit to
3.
run for about 4-5 minutes and then turn the power off.
Allow the vinegar to act for about 30 minutes.
4.
Rinse the container thoroughly with warm water and dry.
5.
If there is still food residue in the container or on the blade,
carry out a thorough cleaning with warm water and 2-3 drops
of washing-up liquid.
(See instructions: Normal cleaning of the container)
Cleaning of the lid, measuring cup and tamper
The lid, measuring cup and tamper are best cleaned with commercial washing-up liquid in
warm water.
Danger of injury: The blade of the container is sharp. Be
careful when washing or drying the jug when you put your
hand into the container.
» , and Important: To ensure consistent quality, do not clean the
container, tamper, lid and measuring cup in the dishwasher.

Technical data

Nominal voltage
Nominal power
Frequency
Maximum dimensions incl. 1.9L container
(width x depth x height)
Weight
Cable length
Material of motor housing
Material of jar/container
Test method:
Warranty
Frequency band
Max output power
PCBA Hardware Version
Software Version
220-240 Volt
1400 Watt
50/60 Hertz
22 x 23 x 47 cm
8.6 x 9.1 x 18.5 Inch
5.7kg / 12.5 pounds
1.8m / 70.9 Inch
Pressure cast
Tritan
EN/IEC 60335
(IEC 60335-2-14 and IEC 60335-1)
3 years full warranty
10 years warranty for the motor
119Khz-140Khz
-53.24dBm
Body: V06A - LCD: V06
HT-SOFTWARE-034-A15011A-C-
U201-V08_(20161121)
3