Publicité
Les langues disponibles
Les langues disponibles
1074, Avenue des Carrières – Z.A la Plaine du Caire III
13830 ROQUEFORT LA BEDOULE – FRANCE
www.ermax.fr - E-Mail : accueil@ermax.fr
Fixing kit
- 2 rubber inserts Ø5
- 2 plastic washers Ø5
- 2 holed screws
- 2 steel washers Ø10 typ M
- 2 black blind nuts M8
- 2 metallic bars Ø10 + plastic screws
Instructions
- Unscrew the 6 screws on the nose fairing at the above indicated locations.
- Put in place the ABS support on the original nose fairing, and fix it with the original screws.
- Unscrew mirrors and fit metallic bars as show on picture, without tightening them.
- Put in place rubber inserts on the ABS support and fit the windshield with the 2 BHc 5×20 screws and plastic
washers. Fix the windshield on metallic bars.
- Control the right location of the windshield and tighten all fixings.
* Painted and varnished parts are not guaranteed against high pressure steam washes or aggressive cleaning products which can damage them and unstuck the varnish. We advise moreover, according to the technical data of our
painting suppliers, to wait one month to obtain a complete polymerization of varnish.
* Accessories gone up on the motorbike will not be any more considered as new and will be neither retaken nor exchanged.
* Ermax accessories are foreseen for original equipments. They will not be guaranteed if they are used in others conditions.
* Due to vehicles made tolerances, beyond our control, some Ermax products might need adjustings to fit.
* The mentioned label of motorbikes's manufacturers are indicated exclusively as a reference to Ermax accessories.
* Screens damaged by an inadequat washing are not guaranteed (abrasive, corrosive ... products, solvent, thinner, benzine ...). Wash immediately brake or battery fluid which may flow on accessories.
ERMAX TOURING WINDSHIELD WITH SUPPORT
ADAPTABLE ON MT09 / FZ 9 2014 → ∞
Whole holed screw + ring + steel
washer Ø8 + blind nut.
The bar pass by the holed screw
and is secured by the ring.
Bracket + steel washer Ø10
- 2 BHC Ø5×20 black screws big head
- 1 ABS support
- 2 metallic rings
- 2 black steel washers Ø8 typ L
- 2 brackets
« CAUTION »
FITTING INSTRUCTIONS
Estimated fitting time : 30 min
Publicité
