Jam Ultra HX-EP900BKA Livret D'instructions page 4

Bluetooth
Devices
JAM ULTRA
CONNECT 1 EARBUD
1x
Connect only 1 earbud for mono sound. This
is a great option if you want to hear your
surroundings as well as your music.
STEP 1 – TURNING ON THE EARBUD
Your earbud will automatically turn on when
taken out of the portable charging case. If you
need to turn it on manually, you can quick-press
the "play/pause" button once on the earbud.
2s
STEP 2 – PAIRING MODE
Once the earbud is powered on, press and hold
the "play/pause" button on the earbud for 2
seconds; LED will flash red and blue. This will
indicate your earbud is in pairing mode with your
device. Alternatively, once earbud is powered on,
after 40 seconds your earbud will automatically
switch to mono pairing mode.
EN
STEP 3 – CONNECTING TO A DEVICE
Enable Bluetooth on your device. From the
Bluetooth menu, select "Jam Ultra." When the
device and Ultra are connected, you will hear a
tone. This means pairing is complete.
Bluetooth
Devices
JAM ULTRA MONO
STEP 3 – CONNECTING TO A DEVICE
Enable Bluetooth on your device. From the
Bluetooth menu, select "Jam Ultra Mono."
When the device and Jam Ultra Mono are
connected, you will hear a tone. This means
pairing is complete.
TURNING OFF YOUR EARBUDS
5s
To turn off your earbuds, place the earbuds back
in your case, or press and hold the "play/pause"
button on the earbuds for 5 seconds.
4