Safety And Conformity; Technical Specifications - ELRO PRO PV40-P2M2 Mode D'emploi

Safety and conformity

Disclaimer
ELRO is not liable in any way to damage caused during mounting/installation.
In doubt always consult a professional.
Caution
Do not plug in more than one power plug at the same time. This may cause excessive
•
heat or a fire.
Do not connect other products to the device while using it. This may cause malfunction.
•
Do not use water, thinners, or detergents used for cleaning oil products when cleaning
•
the outside of the device. Clean it with a dry cloth to prevent malfunction or electric
shocks.
• Do not install the product in a damp environment. This may cause an electric shock or a
fire.
Unplug the power cord gently. If damaged, the power cord may cause a fire or an electric
•
shock.
Do not plug in the power plug with a wet hand. This may cause an electric shock.
•
Do not disassemble, repair, or alter the product. This may cause a fire, an electric shock,
•
or an injury due to malfunctioning of the product.
Do not use an alternating current interruptor. This may cause an electric shock.
•
Do not plug in the power plug if the holes in the socket are bigger than usual. This may
•
cause an electric shock or a fire.
• Make sure no dust or other substances are collected on the product.
• Make sure no substances get into the product. This may cause malfunction.
• Do not place heavy objects on the product. This may cause malfunction.
• Do not disassemble the product and prevent any damage.
• Avoid direct sunlight on the heating systems during installation.
• Install the product on a flat and stable surface to ensure optimal functioning.
• Unplug the device if unused for a long period of time.
• Immediately unplug the device if it produces unusual sounds and contact the service
centre.

Technical specifications

Monitor
- 22 -