ALPATEC RCM 2000 EIT Notice D'utilisation page 9

All manuals and user guides at all-guides.com
notice RCM2000ET:notice RC_20ET
SPECIFICATIONS
Model
Voltage
Maximum Power
Class
This appliance has been designed for wall mounting only. Do not use it in another position.
SECURITY DISTANCE TO BE RESPECTED :
- Mark the place of the 2 screws on the wall (distance of 470 mm between) (Fig. 2).
- Use a level to check the horizontally of the heater.
- Drill the holes, insert screw anchors and put the two screws inside.
- Place the appliance in front of the screws, and put them inside the mounting holes of the support
(L shaped).
- Move the appliance to the right and downwards to fix it.
- Use the most convenient pre-cut cord 'knock out' to pass the power cord.
13/05/08 10:00 Page 9
RCM 2000 EIT
220 – 240 V – 50 Hz
2000 W
II
USING
9
Fig. 2