ALPATEC RCM 2000 EIT Notice D'utilisation page 10

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

All manuals and user guides at all-guides.com
notice RCM2000ET:notice RC_20ET
Press 0/1 button situated on the right of the product. A bip sound is emitted.
ALL FONCTIONS ARE AVAILABLE FROM THE REMOTE CONTROL
Take out the remote control from the storage. Put 2 AAA batteries.
STARTING
- Press M/A button to switch on, the heater starts on fan mode and the ambient temperature is
displayed.
- Press again M/A button to switch off the appliance. Fan functions during several seconds to cool
heating element (if needed).
POWER SETTING :
Press Puissance button (9) to select :
- Low power : 1000 W, "L" is displayed.
- High power : 2000 W, "H" is displayed.
- If you want to use the fan only mode, stop and restart the product.
TEMPERATURE SETTING :
- Press Temperature button (10), heater starting value "30°C" flashes on the display.
- Press Temperature button again to set temperature from 15°C to 36°C.
- If set temperature is lower than ambient temperature, the product turns to fan.
OSCILLATION :
- Press Oscillation button (8),
- Press Oscillation button again, wings stop swinging. Indicator goes out.
TIMER SETTING : (only available from remote control)
Press Minuteur button (11) on the remote control to start timer. Time is displayed.
Press the button once or more to select time desired from 1h to 8h.
IONIZER SETTING : (only available from remote control)
- Press Ioniseur button (7),
- By generating negative ions, the ioniser function allows to restore air electric balance and gives a
well-being sensation.
- Press again Ioniseur button to stop ionizer function. Indicator goes out.
AUTOMATIC CUT-OFF :
- This appliance is equipped with an automatic cut-off device in case of overheating.
- Switch off and unplug the appliance.
- The dust may be removed with a soft cloth or a vacuum cleaner.
- Clean the body with a soft, dry cloth (never immerse appliance in water), do not allow water to run
into the interior of the heater.
13/05/08
10:00
Page 10
STARTING
is displayed and wings swing up and down.
is displayed.
CLEANING
10

Publicité

Table des Matières
loading

Table des Matières