Cycle Selection; For Best Results; Operating Instructions - Kenmore 970L8191 Guide D'utilisation Et D'entretien

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

1
2
POWER Button
1

Cycle Selection

2
This manual covers many models and not all cycles, options, or features listed are available on every model. Console shown above for
reference only. Your model may diff er.
Cycle Selection
Press the POWER button to turn on the unit. Press the icon
for the cycle desired and the indicator for that cycle will
be illuminated. To power the unit off , press and hold the
POWER button until the unit shuts down.
To change the cycle once the cycle has begun, press and
hold the POWER button to cancel the current cycle, press
the POWER button to turn on unit again, select a new cycle,
and press START again. Just pressing another cycle icon will
not change the cycle.

For best results

Follow the fabric care label
instructions on items to
be dried.
Auto Dry Cycles
Auto Dry cycles take the guesswork out of selecting the
correct drying time for each load. Moisture sensing bars in
the front of the dryer drum sense the moisture level of the
load as it tumbles through the heated air. With Auto Dry
cycles, the load will automatically be dried at the selected
temperature to the desired dryness level. Auto Dry cycles
save time and energy and protect fabrics.
When the load has reached the selected dryness level, it
will continue to tumble during a cool down period. This
helps reduce wrinkling and makes items easier to handle
during unloading.
Drying time varies depending on size and dampness of
load and fabric type. If the load is too small or almost dry,
the moisture sensing bars may not detect enough moisture
to continue the cycle and the cycle may end after a few
minutes. If this occurs, select a Timed Dry cycle.
Room temperature, and electrical voltage can also aff ect
drying time.
3
4
Favorites Button
3
Cycle Options / Cycle Status Display
4
9

Operating Instructions

5
Temp Button
5
START/PAUSE Button
6
Normal
Select this Auto Dry cycle for cotton items.
Heavy Duty
Select this Auto Dry cycle to dry durable fabrics such as
jeans and overalls.
Delicates
Select this Auto Dry cycle for knits and delicate items.
Casual
Select this Auto Dry cycle for cottons and blends with a
no-iron fi nish.
Mixed Load
Select this Auto Dry cycle to dry loads containing a mix
of fabrics.
Touch Up
Select Touch Up to help remove wrinkles from clean and
dry items that were not taken from the dryer at the end of
the cycle, have been stored in crowded closets or drawers,
or unpacked from luggage following a trip. It provides
approximately 10 minutes of low heat tumbling followed
by a 25-minute cool down period.
Towels
Select this cycle to dry heavy loads such as towels and
non-rubber-backed bath mats.

Publicité

Chapitres

Table des Matières
loading

Table des Matières