Oven Operation - ottimo OT2B-32 Manuel D'instructions

ENGLISH
OPERATION INSTRUCTION
Before using:
1. Ensure that the distance between the oven with the wall (back & side) or other oven is
at least 15~25cm, and always place it in a dry environment.
2. When using the oven for the first time, place the oven on max setting for 3 minutes. Do
not put anything into the oven during this period. The oven may generate smoke at
this time. It is normal; the smoke (smell) will clear off safely within a few minutes of
use.
HOTPLATE OPERATION
Middle Temperature control
Bottom Temperature control
1. Turn the desired control knob to choose temperature setting; the knob is marked
"MIN-MAX" that means the temperature is from low to high.
2. Place a flat-pot or pan onto the desired heater and start cooking.
NOTE : Maximum bottom base of cooking utensil should not be exceeded 26cm
(Dia.).
3. Do not leave the element "ON" without any pot or pan on the heater. This will damage
the heater and cause excessive heat.
4. When turning the control knob to low or high, this will adjust the heater temperature.
5. It is possible to operate both heaters and oven at the same time.
ATTENTION: We advise that you only use 1 heater or oven at one time to avoid your
house circuit breaker becoming overloaded. After use turn the temperature knob to "MIN"
position and unplug the appliance.

OVEN OPERATION

Upper heater: 700W
Lower heater: 700W
1. To grill, bake or a combination of both is controlled by the top knob and the bottom
rocker switch, the top knob which is marked 50-250
is from low to high.
2. Turn the desired switch "ON" (Grill switch or bake switch), or turn both switches on.
The temperature in the oven will circle once turning on the control switch.
ATTENTION: If the control knob is pointed to "O" (OFF), it indicates the grill or bake switch
is switched off. Select the temperature setting first, and then choose desired roast style by
switch.
Right element
Left element
0
C grade means the temperature
4
800W
1000W