Toshiba Canvio AeroCast Manuel D'utilisation page 10

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

10
Always make sure the drive and AC adaptor have
adequate ventilation and are protected from
overheating when the AC adaptor is connected to
a power outlet. Inadequate ventilation may cause
the drive and AC adaptor to overheat resulting in
a fire or electric shock and serious injury.
If dust gets on the power plug connectors or
connector base, turn the power off and
disconnect the power plug. Then clean the
connector and/or connector base with a dry soft
cloth. Failure to do so may cause a fire or electric
shock, possibly resulting in serious injury.
Avoid extended contact between the drive and
your skin. The drive may become hot! Avoid
prolonged contact to prevent skin irritation and/or
heat injury.
Never pull on a power cord/cable to remove a
plug from a socket. Always grasp the plug
directly.
Do not place the drive on a shaky table, uneven,
tilted surface or other unstable location. The drive
may fall, causing damage to the drive or possibly
injury.
Do not disconnect the USB cable and AC
adaptor while operating, as it may result in loss of
data or damage to the drive.
Do not touch the USB cable and AC adaptor
while operating, as it may result in loss of data or
damage to the drive.
Do not bump, drop or jar the drive, as it may
result in loss of data or damage to the drive.
Do not use the drive at high or low temperatures
or sudden temperature changes. This may result
in loss of data or damage to the drive. (Operating:
5° C-35° C).
Do not cover the drive during operation, as it may
become overheated.

Publicité

Table des Matières
loading

Table des Matières