Zen & Pur Kaly Manuel D'utilisation page 27

The «SOFT» AND «HARD» functions are automatic working programs.
Press each of the buttons can stop the appliance when in operation. If you need to blend for a longer time,
to get a smoother blend, you can press the function button again to launch another blending sequence.
You can stop the machine by pressing the button again.
The maximum operating time is 2 minutes. Do not let the appliance run continuously longer
than the time indicated above. Then let the appliance cool for 2 minutes. When processing
thicker or harder foods or liquids, do not let the appliance run for more than 1 minute.
If food sticks to the blade unit
and unplug it. Make sure that the blade unit
unit A3 and turn it so that the blade unit
clean the blade unit A2 and the wall of the container
unit A2 together and attach it back to the motor unit A3. Plug the cord in and continue blending.
After blending is finished, unplug the power cable. Make sure that the blade unit
and remove the blending container assembly from the motor unit A3.
Turn the blending container
A2 and, if necessary, close bottle
Clean all parts used according to the instructions in the chapter «CLEANING AND MAINTENANCE».
N O T E
W A R N I N G
5.
A2 or to the wall of the blending container
A2 has stopped turning. Remove the container set from the motor
A2 points upward. Remove the blade unit A2. Use a plastic spatula to
A1, A9
6.
7.
A1, A9 ou A10 so that the blade unit
A1 with the lid A6 or pour the contents into another appropriate container.
8.
A1, A9 ou A10, turn the appliance off
ou A10. Put the blending container and the blade
A2 has stopped turning,
A2 points upward. Remove the blade unit
27