Setting The Clock And Timer; Setting The Clock - JVC NX-PN7 Manuel D'instructions

Setting the Clock and Timer

Setting the Clock

Set the built-in clock before using the Timer.
• You can set the clock when the unit is turned on or on standby
Activate the clock setting mode.
1
• If you have already adjusted the clock before, press the button 2 times to
activate the clock setting mode.
1 Adjust the hour while the hour digits of the time indication flashes on the
2 Adjust the minute while the minute digits of the time indication flash on the
3 Select the day of the week.
2
• To exit from the clock setting, press CLOCK/TIMER as required.
• To correct a misentry during the process, press MENU/CANCEL. You can return to the previous
step.
• If there is a power failure, the clock loses the setting and is reset to "AM12:00." You need to set
the clock again.
18
"AdjCLOCK" appears then the hour digit of the time indication flashes on
the display.
TIMER 1/TIMER 2/TIMER 3
Canceled
display.
display.
SUN DAY MON DAY
(Sunday) (Monday)
THU DAY FRI DAY
(Thursday) (Friday)
"CLOCK OK" appears and the built-in clock starts working.
*
Clock setting
TUE DAY WED DAY
(Tuesday) (Wednesday)
SAT DAY
Back to the beginning
(Saturday)
*
See page 19.