TASSILI AGNES Guide D'installation page 2

TOILET SEAT
INSTALLATION GUIDE
NOTES
1. Make sure all the parts are included in the package, should
one be missing, please contact the retailer where you have
purchased this product.
2. When you take the parts from the carton, keep them together
in a container to avoid losing them.
3. When the installation is completed, make sure the seat
and cover is firmly installed.
4. For maintenance, do not use corrosive products or solvents
(such as gasoline, thinner or turpentine), or sharp objects.
Clean the surface with a mild soap and water and dry with
a clean and soft cloth.
5. Do not remove the plastic protector before using the seat
and cover.
1
3
CMG10-2019
AGNÈS / CÉSAR
3021120 / 3021121
TASS I L I .CA
Insert the fittings into the bowl
openings.
NOTE: Do not fully tighten
screws.
Remove the seat by lifting
it vertically, tighten fittings,
and cover them with caps.
WHITE
Fabriqué et emballé en Chine /
Made and Packaged in China
Importé par / Imported by NOVELCA
Québec, Canada G2J 1C8
6. Some bathroom chemicals and cosmetics may damage
the finish.
7. The closing speed of seat with slow closure mechanism may
vary according to room temperature and frequency
of use.
8. Do not place heavy objects on the seat and do not stand as
the weight could damage the seat or you could fall.
9. Do not expose the product to direct sunlight to avoid fading it.
10. Do not let children handle the seat to avoid pinching
their fingers.
2
4
With the toilet seat in vertical
position, push it onto the
fittings and adjust the seat
position to the toilet bowl.
Reattach the seat: place it in
a vertical position push it onto
the fittings until you hear
a click.