Spécifications Générales; Spécifications Des Sorties - LEGRAND 0 042 76 Guide D'installation

1 Spécifications
1.1 Spécifications générales
Description
Opetating -25 +55°C
Temperature Displayed : -10 -55°C
Storage Temperature -30 +70°C
Humidity 35 - 85% Relative humidity, no condensation
Device and RTC
20 days (25°C) by capacitor
Backup
RTC Accuracy 5 s / day (25°C)
1000 Vpp, 1 μs, 30 - 100Hz, tested by noise
Noise Immunity
simulator
Software Class IEC60730-1, Section H6.18 - Class A
Purpose of contoral IEC60730-1, Section 2.2 - Electonical Control
Construction of
IEC60730-1, Section 6.15 - Incorporated Control
Control
Whether the Control is
IEC60730-1, Section H2.5.7 - Electonic Control
Electric
Safety Class II
Protection IP20
Temperature for the
75°C
ball pressure test
Pollution degree 2
To be free of corrosive gases. Dast should be
Operation Ambience
manual.
Electrical Isolation Reinforced primary / secondary insulation
Grounding None
EC Directive EMC, LVD
Certifications UL / cUL
Attestation of
TÜV PRODUCT SERVICE
Conformity
UL 508, IEC60730-1, EN61010-01, EN50081-1,
Complies With
EN50082-1, EN61000-6-2
1.1 Spécification des sorties
Description
Tension de démarrage
(001 - 004)
Charge résistive maxi.
(005 - 009)
Charge min.
(001 - 004)
Charge inductive maxi.
(005 - 009)
Temps de réponse
Isolement du circuit
A4 V
A5 V
Spécification
Relay Output
≤ 250 V AC~, ≤ 30 Vdc
8 A / point ( 8 A / common)
2 A / point ( 4 A / common)
50 mW (10 mA, 5 V DC)
249 VA (1/3 hp), 125 V AC~
373 VA (1/2 hp), 250 V AC~
93 VA (1/8 hp), 125 V AC~
93 VA (1/8 hp), 250 V AC~
≤ 10 ms
par relais
35
Description
3750 V AC ~ > 1 min per IEC60730-1 between
the following points:
Power/input Terminals and Relay Output
Dialectric Withstand Terminals
Voltage Relay Output Terminal and Relay Output
Terminal
All Terminals and the DIN 43880 Control box or
equivalent
7 MΩ 500 V DC per IEC60730-1 between the
following points:
Power/input Terminals and Relay Output
Terminals
Insulation Resistance Relay Output Terminal and Relay Output
Terminal
All Terminals and the DIN 43880 Control box or
equivalent
Conforms to IEC 68-2-6:
10 - 57 Hz : 0.15 mm Constant Amplitude
Vibration Resistance
57 - 150 Hz : 19.6 m/s
Direct Mounting
Count for X,Y,Z : 10 times (80 minutes in a each
direction)
Conforms to IEC 68-2-6:
10 - 57 Hz : 0.075 mm Constant Amplitude
Vibration Resistance
57 - 150 Hz : 9.8 m/s
DIN Rail Mounting
Count for X,Y,Z : 10 times (80 minutes in a each
direction)
Conforms to IEC 68-2-27:
147 m/s
Shock Resistance
3 times in each direction X,Y and Z
EC60730-1, Section 6.4.3 - Type 1C (Relay
Output)
Type of Action
EC60730-1, Section 6.4.3 - Type 1Y (Transistor
Output)
3
24
Spécification
Acceleration Sweep
2
Acceleration Sweep
2
Acceleration, Action Time : 11 ms
2