Avanti CBC112Q0WG Manuel D'instructions page 13

Moisture forms on inside appliance walls.
Moisture forms on outside of appliance.
The door will not close properly.
appliance by putting wood or metal shims under
part of the appliance.
The appliance is touching the wall. Re-level the
appliance and move it from the wall.
See "Installation Instructions"
Weather is hot and humid, which increases
internal rate of frost build-up. This is normal.
Door is slightly open.
Door is kept open too long, or is opened too
frequently. Open the door less often.
The door is not sealed properly.
Door is slightly open, causing cold air from inside
the appliance to meet warm moist air from
outside.
The appliance is not on a level surface.
The gasket is dirty.
The storage baskets are out of position.
13