Charging - Philips S1000 Mode D'emploi

All manuals and user guides at all-guides.com
General

Charging

S1332 only
Charging with the supply unit
2
1
- This shaver can be safely cleaned under the
tap.
- The supply unit is suitable for mains voltages
ranging from 100 to 240 volts.
- The supply unit transforms 100-240 volts to a
safe low voltage of less than 24 volts.
Note: You can also use the shaver while it is
plugged-in and charging.
Charge the shaver before you use it for the first
time and when the display indicates that the
battery is almost empty.
When you charge the appliance for the first time or
after a long period of non-use, let it charge until
the charging light lights up continuously.
Charging takes approx. : 8 hours (S1232 only) or 1
hour (S1332 only). A fully charged shaver has a
shaving time of up to 40 minutes (S1232 only) or 45
minutes (S1332 only).
Note: Before first usage charge the appliance for 3
hours without interruption and until the battery
charging indication shows that the battery is full.
This is needed to make maximum use of the
battery capacity. All future charges will take 1 hour.
1 Put the small plug in the appliance.
2 Put the supply unit in the wall socket.
- The charging light shows the charging status of
the appliance.
9
English