Safe Handling; Product Description; Package Includes - B.Braun Aesculap Suhl GT203 Mode D'emploi

1.

Safe handling

CAUTION
Federal law restricts this device to sale by or on
order of a physician!
Risk of fatal injury from electric
shock!
Do not open the product (except
for changing a charging bay).
DANGER
Connect the product only to a
grounded power supply.
Prior to use, check that the product is in good
working order.
Store the charger and Li-ion batteries at room tem-
perature.
Keep dry the charger and Li-ion batteries.
Charge the Li-ion batteries prior to first use.
Observe our "Notes on Electromagnetic Compati-
bility (EMC)".
To prevent damage caused by improper setup or
operation, and in order not to compromise war-
ranty and manufacturer liability:
– Use the product only according to these instruc-
tions for use.
– Follow the safety and maintenance instructions.
– Ensure the manufacturer's approval before using
accessories that are not mentioned in the instruc-
tions for use.
Ensure that the product and its accessories are
operated and used only by persons with the requi-
site training, knowledge, or experience.
Keep the instructions for use accessible for the
user.
Always adhere to applicable standards.
Ensure that the electrical facilities in the room in
which the device is being used conform to IEC
norms.
Unplug the device by pulling the plug, but never by
pulling the power cord.
All manuals and user guides at all-guides.com
2.

2.1 Package includes

Designation
2 x Li-ion batteries
1 x Charger
Mains power cord (with device
plug)
2.2 Intended use of charger GT203/Li-
The charger GT203 is used for charging the battery-
powered shearing machine FAV5 CL and the Li-ion
battery. There is one charging bay each for the two
components.
Do not operate the product in explosion-hazard
areas.
Do not use the product if it is damaged or defec-
tive. Set aside the product if it is damaged.

Product description

ion battery GT201
Art. no.
GT201
GT203
see Chapter
Accessories/
Spare parts
3