Electrical Connection; Design And Function - CASO DESIGN BG 1000 Manuel D'utilisation

 Select an installation location where children cannot reach the appliance's hot surface.
 Do not set up the device in a hot, wet or extremely damp environment or near
flammable material.
 Do not use the appliance near flammable materials such as curtains, kitchen towels,
wooden surfaces, etc.
 During operation of the appliance, there needs to be sufficient area for air circulation
above the appliance and on all its sides.
 Do not use the appliance outdoors.
 The device is not intended to be installed in a wall or a built-in cupboard.
 The electrical socket must be easily accessible so that the power lead can be
disconnected easily, in the case of an emergency.
 The installation and assembly of this device in non-stationary setup locations must be
carried out by specialist companies / electricians, provided they guarantee the
prerequisites for the safe use of this device.

12.6 Electrical connection

In order to ensure the safe and trouble-free operation of the device, the following
instructions must be observed for the electrical connection:
 Before connecting the device, compare the connection data (voltage and frequency) on
the rating plate with those of your electrical network. This data must agree in order that
no damages occur in the device.
If in doubt, ask your qualified electrician.
 The electrical outlet must be protected by a 16A safety cut-out switch.
 The connection between the device and the electrical network may employ a 3 meter
long (max.) extension cable with a cross-section of 1.5 mm². The use of multiple plugs
or gangs
is prohibited because of the danger of fire that is involved with this.
 Make sure that the power cable is undamaged and has not been installed under the
oven or over hot or sharp surfaces.
 The electrical safety of the device is only guaranteed if the device is connected to a
properly installed protective conductor system. Operations using an electrical outlet
without a protective conductor are prohibited. If in doubt, have the house installation
checked over by a qualified electrician.
The manufacturer cannot be made responsible for damages that are caused by a
missing or damaged protective conductor.

13 Design and Function

This chapter provides you with important safety notices on the design and function of the
device. Double contact grilling is roasting form above and below. Advantages are: a fast,
juice preserving and delicious grilled food.
Caso Kontaktgrill BG 1000 28