Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
DESCRIPTION G10137
1. Cooking plate
OPERATING
-
Place the unit on a flat and stable surface, leaving enough space at the sides of the product.
-
Place a suitable pan in the center of the cooking area (2) and put the food inside the vessel.
-
Connect the plug to the power supply: the unit will beep.
Push ON/OFF button on panel (4) the display shows "ON".
-
1) Cooking with power regulation
Touch one time the "Function" button that is below the hob you want to use. The unit turns on and the
-
display shows "1600W".
- Using the keys "UP" and "DOWN" it is possible to change the power and thus the amount of heat
transmitted. Power can be set on: 200, 350, 500, 650, 800, 1000. 1200, 1400, 1600, 1800W.
After cooking, push the ON / OFF button, to turn off the appliance. Display shows "OFF"
-
1A) Timer after power regulation
Press "Timer" during cooking. The display shows "0:00".
-
With the keys "UP" and "DOWN" set the duration of cooking, up to 3 hours.
-
-
Display will show for some seconds the time set.
-
During cooking on the display will appear the power selected, and the time set.
-
Cooking will stop automatically when time finishes.
2) Cooking with temperature regulation
Press "Function" 2 times, until the red light "Temperature" switches on, and display shows "240".
-
With the keys "UP" and "DOWN" select temperature. There are 10 selectable levels, from 60° to 240°C.
-
2A) Timer after temperature regulation
Press "Timer" during cooking. The display shows "0:00".
-
With the keys "UP" and "DOWN" set the duration of cooking, up to 3 hours.
-
-
Display will show for some seconds the time set.
-
During cooking on the display will appear the temperature selected, and the time set.
-
Cooking will stop automatically when time finishes.
KEY LOCK
To lock the keypad on the control panel (4) press the key "Lock" during use. On display
the "Lock light" switches on to indicate the lock. To unlock press together the key "Lock" for 3 seconds.
SAFETY DEVICE
The unit turns off automatically if there is any pan placed on it, or it is removed, or it is made of such a
material not suitable for induction cooking.
In this case, the unit will show E0 for a while, and then goes into stand-by mode.
Every time you turn off the appliance by pressing the ON / OFF button, the fan will continue to run until
cooling down of any part of the unit. To turn off the product, always push the ON / OFF button, do not turn it
off by removing the cooking container or by unplugging the unit.
2. Cooking area
Control panel (4)
3. Bottom: ventilation fan
4. Control panel
13
Publicité
Table des Matières
