Schwamborn BEF 250E Mode D'emploi page 4

BEF 250E
BEF 250V
Follow the safety instructions and procedure in
the operating manual and in the spare parts plans!
If any defects are found in the machine that could
endanger persons or damage property, stop the
machine immediately and ensure that it cannot be
used again until all repairs are completed.
Before starting cleaning or maintenance work:
- End operation!
- Let machine cool down!
BEF 250E:
When working on the machine (set-up, maintenance,
service, repair, cleaning, etc.), the power supply of the
machine has to be disconnected from the mains
(disconnect power plug)!
Maintenance
Electrical components:
Visual check for damages
Check dead man's switch.
Machine:
Visual check for damages
Clean the connection to the
dust extraction and
chassis from milling residues.
Check the seal strips
and replace if necessary.
Check wheels and brakes
and replace if necessary.
BEF 250V:
Check fuel levels of petrol and
motor oil and refill if necessary.
Check and clean air filter and
replace if necessary.
4
Maintenance plan
1x/Day 1x/Week Notes
X
Attention:
Electric shock and risk of fire due to faulty electrical
cables! Check the power line and power plug regularly for
X
functional safety.
X
X
Attention:
Do not use solvents to clean the machine!
X
X
X See
SAE 10W­40 (motor oil 1,1 litres)
The operating and maintenance personnel responsible
for the machine must ensure that no one can enter the
machine's danger zone during operation or
maintenance work.
Maintenance work may only be performed by trained
specialists! They must be familiar with the dangers
associated with such work, protect themselves and avoid
danger!
The machine needs to be secured against tipping during
maintenance work!
If necessary, make use of braces.
Keep in mind the weight of the machine and the
machine parts! Secure dismantled parts against falling.
After cleaning and maintenance work, check the safety
equipment for completeness and functionality.
Honda operating manual!
2021 - 02