Saba FL914L21W Mode D'emploi page 63

Levelling the washing machine
Warning!
• The lock nuts on all four feet must be screwed tightly against
the housing.
1. Check if the legs are closely attached to the cabinet. If not, please
turn them to their original positions tighten the nuts.
2. Loosen the lock nut turn the feet until it closely contacts with the
floor.
3. Adjust the legs and lock them with a spanner, make sure the
machine is steady.
GB
Connect Water Supply Hose
Warning!
• To prevent leakage or water damage, follow the instructions in
this chapter!
• Do not kink, crush, modify or sever water inlet hose.
• For the model equips hot valve, connect it to hot water tap
with hot water supply hose. Energy consumption will decrease
automatically for some program.
62
Raise Lower
Lock nut
foot
foot