Publicité
Les langues disponibles
Les langues disponibles
E
MAINTENANCE
C C
Remove the plug from the socket before carrying out any maintenance or
cleaning work on the machine. For safety reasons it is forbidden to use water
while cleaning:
Clean the outside with a slightly damp cloth followed by a dry cloth.
Do not use alcohol or cleaning products when cleaning.
Clean the air filter every week. Remove the filter from the back of the
machine and clean it with a vacuum cleaner.
Clean the front (grille) with a vacuum cleaner (fig. C).
F
STORAGE
Take the following steps if you do not intend to use the machine for an extended
period of time:
Allow the machine to cool down.
Remove the plug from the socket and empty the reservoir.
Clean and/or replace the air filter. Filters are available at your supplier.
Store the machine in a dust-free environment, e.g. in a plastic bag.
G
TIPS FOR SAFE OPERATION
The machine was designed to dehumidify and to heat. You should not use it
for any other purpose.
It is dangerous and forbidden to modify the machine.
Always contact your supplier if repairs are required.
It is forbidden for children to play with the machine. The machine may only
be used by adults.
The machine must always be connected to the mains with an earthed connection.
Avoid the use of extension cables or multiple plug boards.
Always switch the machine off before carrying out maintenance or cleaning
work.
Do not install the machine near heat sources or near flammable
installations/materials (e.g. curtains) or explosive environments.
Whenever you disconnect the machine, you must always wait at least three
minutes before reconnecting it.
When connecting and disconnecting the machine from the power supply, the
ventilator/selector switch must be set to the '0' setting.
It is forbidden to cover the machine or to insert foreign objects into the
machine in connection with the risk of overheating or fire.
Ensure that the wires are concealed when placing the machine.
The machine may not become wet.
The machine must always be placed vertically, particularly during transport.
Always empty the water reservoir before transporting the machine.
This machine has a safety system that automatically switches the machine off in
case of overheating or if the airflow is hampered. If this occurs, disconnect the
machine and remove the object (from the back of the machine). Allow the
machine to cool down for approximately 15 minutes before reconnecting it.
4
29
Publicité
