Velleman PCUSBVGA2 Notice D'emploi page 17

10. Mac OS User Guide
This guide applies to Mac software version 1.0 and higher.
What Is the Mac driver?
The Mac driver is designed for MAC OS 10.4 (Tiger), 10.5 (Leopard) and 10.6 (Snow Leopard) to enable you to
add an additional display to your Mac using DisplayLink technology. This software enables you to run your
adapters on any Intel-based desktop or laptop Mac, allowing you to connect up to 4 additional displays via USB.
Important note: PowerPC-based Macintosh computers such as late model iMacs, PowerBooks and Power Macs
are currently not supported.
What Else Do I Need to Use This Driver?
Apart from an Intel-based Mac running the latest versions of Mac OS 10.4, 10.5, or 10.6, you will need an
adapter. One adapter is required for each additional display that you wish to connect to your Mac.
Setup Guide – Installing/Uninstalling the Mac Driver
1. To run the Mac installer, double-click the Mac
DriverInstaller image.
2. Select Software Installer to begin installing the Mac
driver on your Mac. This will require a restart once
completed.
3. Select User Guide to view the user guide.
4. Select Software Uninstaller to uninstall the Mac driver
from your Mac. This will require a restart once completed.
Connecting Displays to Your Mac
Once you have installed the Mac driver, simply plug in your adapter(s) via USB and connect each display to an
adapter. You can now connect up to 4 additional displays. Examples of setups are given below:
Example 1: adding two displays to a MacBook Pro. The MacBook Pro connects to two displays via USB cables
using adapters. The displays connect to the adapters via standard VGA/DVI cables.
Example 2: adding three displays to a MacBook Air. The MacBook Air connects to a standard powered USB
hub. Three displays are connected to the USB hub via adapters. The displays connect to the adapters via
standard VGA/DVI cables.
V. 02 – 26/04/2012
PCUSBVGA2
17 ©Velleman nv