Features.and.functions; Measuring Platform; Preparations.before.use; Positioning The Monitor - Tanita UM-028F Mode D'emploi

FEATURES AND FUNCTIONS

Measuring Platform

1. Display Screen
2. Set Button / Memory Button
3. Arrow (Select) Buttons
4. Arrow (Select) Buttons / Data Botton
5. Ball-of-Foot Electrodes
6. Heel Electrodes
7. On / Off Key
Accessories
8. AA-Size Batteries (4)
PREPARATIONS BEFORE USE
Inserting the Batteries
Open the battery cover on the back of the measuring platform. Insert the supplied
AA-batteries as indicated.
Note: Be sure that the polarity of the batteries is set properly. If the batteries are
incorrectly positioned the fluid may leak and damage floors. If you do not intend to
use this unit for a long period of time, it is advisable to remove the batteries before
storage.
Please note that the included batteries from the factory may have decreased energy
levels over time.

Positioning the Monitor

Place the measuring platform on a hard, flat surface where there is minimal vibration
to ensure safe and accurate measurement.
Note: To avoid possible injury, do not step on the edge of the platform.
Handling Tips
This monitor is a precision instrument utilizing state-of-the-art technology. To keep the unit in the best condition, follow these
instructions carefully:
• Do not attempt to disassemble the measuring platform.
• Store the unit horizontally, and place it so that the buttons will not be pressed accidentally.
• Avoid excessive impact or vibration to the unit.
• Place the unit in an area free from direct sunlight, heating equipment, high humidity, or extreme temperature change.
• Never submerge in water. Use alcohol to clean the electrodes and glass cleaner (applied to a cloth first) to keep them shiny; avoid
soaps.
• Do not step on the platform when wet.
• Do not drop any objects onto the platform.
1.
4.
5.
3.
2.
5.
6.
7.
8.
Eng
Open as shown.
Direction of the batteries.
3