Speedaire 35XR81 Manuel D'utilisation Et De Pièces Detachées

Operating Instructions and Parts Manual
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or
property damage! Retain instructions for future reference.
Speedaire
Guns
For Warranty & Service call 1-888-606-5587
Do Not Return To Branch
Description
Speedaire general purpose spray guns are designed to spray most types of paints and
materials. They are ideal for home, farm, and commercial uses.
Safety Guidelines
This manual contains information that is
very important to know and understand.
This information is provided for SAFETY
and to PREVENT EQUIPMENT PROBLEMS.
To help recognize this information,
observe the following symbols.
Danger indicates an
imminently
hazardous situation which, if not
avoided, WILL result in death or serious
injury.
Warning indicates a
potentially
hazardous situation which, if not
avoided, COULD result in death or
serious injury.
Caution indicates a
potentially
hazardous situation which, if not
avoided, MAY result in minor or
moderate injury.
Notice indicates
important
information, that if not followed, may
cause damage to equipment.
NOTE: Information that requires special
attention.
Specifications
Air SCFM @
Model Required 40 psi
35XR81 5.3
Average Continuous
Form 5S7534
®
Unpacking
After unpacking the unit, inspect
carefully for any damage that may
have occurred during transit. Make sure
to tighten fittings, bolts, etc., before
putting unit into service.
shipping, handling or use. Damage
could result in bursting and cause
injury or property damage.
General Safety Information
CALIFORNIA PROPOSITION 65
including lead, known to the State of
California to cause birth defects and
other reproductive harm. Wash hands
after handling.
dust when you cut, sand, drill
or grind materials such as
wood, paint, metal, concrete,
cement, or other masonry. This dust
often contains chemicals known to
cause cancer, birth defects, or other
reproductive harm. Wear protective
gear.
Max. Inlet Normal Inlet
Air Pressure Air Pressure
9.6 50 psig 40 psig -
50 psig
Printed in China
09666
CH100 11/14
Spray
Pattern
adjustment knob
Material
adjustment
knob
Do not operate tool
Model 35XR81 components
if damaged during
GENERAL SAFETY
Since the air compressor and other
components (material pump, spray
guns, filters, lubricators, hoses, etc.)
used, make up a high pressure pumping
system, the following safety precautions
This product
must be observed at all times:
contains chemicals,
1. Read all manuals included
with this product carefully.
Be thoroughly familiar with
the controls and the proper
use of the equipment.
You can
2. Follow all local electrical and safety
create
codes as well as the United States
National Electrical Codes (NEC) and
Occupational Safety and Health Act
(OSHA).
Fluid Nozzle Feed
Size Type
0.055 inches Pressure /
(1.4 mm) Siphon
IN278100AV 11/14
Models 35XR81
Trigger
Air cap
Pressure /
Siphon
feed
valve
Air inlet
Canister
Mix Bleed Fluid Delivery
Type Type Speed
Internal / Non- Medium
External bleeder
E
N
G
L
I
S
H
E
S
P
A
Ñ
O
L
MANUAL
F
R
A
N
Ç
A
I
S