hergom ADDA 8 Instructions D'installation, De Service Et D'entretien page 14

5.1. Alarm codes
COOL FIRE
In the event of an even very short lack of current, the stove switches off.
gram the eventual switching on and off times again. In the event of a lack of current, the stove will loose
any previous time settings.
Once the power supply is back, press the key SEND on the remote control to retransmit
the automatic programming you previously set to the stove.
SERV
tact an authorised technical service to arrange a supplementary maintenance.
ALARM NO ACC: FAILED LIGHT UP
ALARM NO FIRE
ALARM FAN FAIL
assistance.
ALARM SOND FUMI
and contact the technical assistance.
ALARM DEP SIC FAIL
In both cases the motor reducer to load the endless screw stops working and the stove switches off.
In the event you have the same problem more than once, please contact the technical assistance.
3