Télécharger Imprimer la page

Deltafox DG-CLM 1833 Notice D'utilisation Originale page 29

Tondeuse à accumulateur

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 49
only be made while the motor is
switched off and the blades are
at a standstill.
Switch off the device, remove the
safety key (
blade to come to a stop. There is a
risk of personal injury.
Observe noise control and local
regulations.
Filling level indicator
A level indicator is fitted on the
side of the grass bag.
Flap open:
grass catcher empty
Flap closed:
grass catcher full
Mounting/removing the
grass box
1. To mount the grass catch box (13) lift
the impact protection (14) and mount
the grass catcher box (13).
2. Lower the collision guard (14) onto the
grass box (13) - it will keep it in place.
3. To remove the grass box (13), lift the
collision guard (14) and unhook the
grass box from the mounting bracket.
Flap down the collision guard to the
housing.
Adjusting the Cut Height
There are 5 different cutting heights:
55 - 65 mm - large cutting height
40 - 55 mm - medium cutting height
25 - 40 mm - low cutting height
20) and wait for the
1. Hold the cutting height adjuster
(8) and move it to the correct
cutting height, as appropriate.
The correct height is around 25 – 45 mm
for a decorative lawn and around
45 –65 mm for a used lawn.
A higher cut height should be
selected for the first cut of the sea-
son.
Observe noise control and local
regulations.
Switching On and Off
1. Place the mower on a level sur-
face.
2. Lift the battery cover (6) of the
device housing and insert the
charged battery (7) along the
guide rail into the device. It
clicks audibly into place.
3. Insert the safety key (20) in the
corresponding opening (20a)
above the rechargeable battery.
4. Close the transparent cover (6)
again.
5. Before switching on, ensure that
the equipment is not in contact
with any objects.
6. To switch on, press the power
switch (17) and hold it down
while pressing the safety
switch (18) against the bow-type
handle (1). Release the power
switch (17).
7. To switch the apparatus off, let
go of the security switch (18).
After switching off the equip-
ment, the blade continues to
turn for several seconds. Do not
GB
29

Publicité

loading