Miele XKM 3200 WL LMD Mode D'emploi page 43

Data protection and data security
When you activate the networking function and connect your appli-
ance to the Internet, your appliance sends the following data to the
Miele Cloud:
- Appliance serial number
- Appliance model and technical features
- Appliance status
- Information about the software status of your appliance
Initially, this data cannot be assigned to a specific user and is not
saved permanently. Data cannot be saved permanently or assigned
to a specific user until after you have linked your appliance to a user.
Data transmission and processing are governed by Miele's strict se-
curity standards.
Factory default settings for network configuration
You can reset all of the settings on the communication module or
your integrated WiFi module to the factory default settings. The net-
work configuration should be reset whenever an appliance is being
disposed of or sold, or if a used appliance is being put into operation.
This is the only way to ensure that all personal data has been re-
moved and the previous owner will no longer be able to access the
appliance.
Copyrights and licences
For the purpose of operating and controlling the communication mod-
ule, Miele uses proprietary or third-party software that is not covered
by open source licensing terms. These items of software/software
components are protected by copyright. The copyright powers of
Miele and third parties must be respected.
Furthermore, this communication module contains software compon-
ents which are distributed under open source licence conditions. The
open source components contained in the appliance along with the
corresponding copyright notices, copies of the licensing terms valid
at the time and any further information can be accessed locally by IP
using a web browser (https://<IP address>/Licenses). The liability and
warranty arrangements for the open source licences displayed at this
location only apply in relation to the respective rights holders.
en - Guide to the appliance
43